One solution, three services, and a production line that belongs to you. The full file: what we install, how we train you, what it earns, and what opticians already equipped say.
Each service brings in its share of revenue. It's adding them together, on one and the same machine, that makes the equipment pay.
The made-to-measure final frame, under your brand.
You no longer resell a supplier's margin on a model the store across the street can order too: you make your own product, with no purchase cost, no tied-up stock, no unsold items. Several tens of minutes per frame.
Repairs in a few minutes, even for your prospects.
Every repair brings a wearer into your store, and 30 to 40% of the wearers you help out come back to buy complete eyewear.
A library of goodies ready to print, expanded every week.
Printable cases, key rings, seasonal point-of-sale displays, display stands, tools. This is what fills the machine's idle hours and turns occasional equipment into a production station.
You configure in a few clicks and print. The modeling is done by our 3D generator: no 3D software to master, no new trade to learn. Your usual workshop skills are enough.
A few minutes for a repair, several tens of minutes for a final frame. And while the machine works, you serve another customer.
Nothing gets shipped out, nothing gets ordered, nothing waits on a supplier. The customer watches their frame being made before their eyes, and leaves with it.
Delivery, printer, commissioning, training. Consumables are ordered directly from the app's shop. Nothing to configure and nothing to set up: a plug-and-play solution that runs on Wi-Fi.
12-month commitment, as a subscription. The amount depends on the region of the world where you're located: an advisor will give you the one that applies to you.

It fits on a small cabinet or a counter, runs quietly and doesn't get in the way of your customer flow. A clean design made for an optical store: it intrigues customers without looking out of place.

A web interface where you import the tracing, adjust the shape, color and details in a few clicks, then start printing. Behind it, our 3D generator does all the geometry work. No 3D skills required.

Included. It's what lets you assemble the frame and fit it on the wearer straight out of the machine, using your usual workshop techniques.

Included. It covers getting started with the app and fitting: no technical 3D-printing training, because none is needed.

A shop built into the app lets you order them directly: PETG for final frames, bio-based PLA for repairs, and everything you need for the OOlib library.


Your store is listed on Vision Minute, the directory of opticians who can do emergency repairs. Wearers in a hurry find you there.
You can buy a 3D printer anywhere. What doesn't exist anywhere else is our 3D frame generator, which turns a lens tracing into a wearable frame in a few seconds, with no manual input.
It's what means you have nothing to model. You capture a shape, choose a style; it calculates the groove, thicknesses, front curvature, hinge axis position and temple geometry, then writes the machine file. A 3D modelling specialist would take half a day. The generator takes a few seconds, and repeats it identically as many times as needed.
The captured shape becomes the geometry of the front. Including asymmetrical shapes, which conventional tracing handles poorly, and models nobody has the reference for anymore.
Lens groove, thicknesses, curve, hinge axis: these are optical rules, not aesthetic settings. The generator applies them to every frame, without you having to think about it.
The same serial number gives back exactly the same frame, years later. That's what makes lifetime after-sales service possible on a frame you made.
The generator runs on our servers. Every improvement in geometry or materials reaches you with no update to install and no machine to replace.
Screenshots of the generator, taken from the tool as it runs today.
If you remember only one thing from this page: your store makes frames. Two kinds, for two completely different moments.
Your collection, under your brand, made one at a time.
In ISO 12870-certified PETG. Modelled in 3D for the customer's face, chosen with them on screen, printed while they wait. It's complete eyewear, sold as such, with the margin of a product you make instead of reselling.
Made around the lenses the customer already has.
In PLA, intentionally short-lived. A wearer comes in with a broken frame and intact lenses: you capture the lens shape, print, and refit their lenses. A few minutes, even if they've never bought anything from you.
The final frame makes the margin. Emergency repairs bring people in. One is sold, the other is seen: a machine making frames in the window attracts wearers who had no particular reason to walk through your door, and thirty to forty percent of them come back to buy complete eyewear.
The rest of the ecosystem (OOlib goodies, the Vision Minute network) revolves around the same machine, and each service has its own page if you want the details.
“As simple as a microwave: you trace, configure in a few clicks, and print.”
There's no technical 3D-printing training to take, because you never operate the printer directly: you use a business interface built for opticians. Onboarding support is included, and it focuses on what you do at the counter.
“Personally, I enjoy making a 3D frame much more than digging through a big box full of temples, and it's more rewarding too.”KrysStrasbourg · Bourgeois
Before modelling anything in 3D, the app captures the shape of the face: width, height, and above all the shape of the nose.
The 3D generator uses it so the bridge hugs the ridge of the nose instead of just sitting on it. That's exactly what separates a frame made for a face from a frame picked in a roughly matching size: a bridge that hugs doesn't leave marks, doesn't slip, and doesn't need pliers at the end of fitting.
It's also what makes made-to-measure possible without modeling skills: you measure, the generator calculates.
Coming soon
Figures reported by practicing opticians. They vary with location, season and how the machine is used.
of the wearers helped out come back to order a final frame.
Krys Strasbourg-Bourgeois
new customers a month, and about ten per holiday period.
Lynx Optique You Do, Claira
new customers won from local competitors.
Krys Rodez-Gambetta
National chains, independents downtown, in shopping malls or in business parks: the service doesn't depend on location.
“The service is great because we can do a repair in 15 minutes, customer feedback is exceptional, and we're the only ones doing it in town. We do it for every glasses wearer in the area, even those who aren't our customers.”KrysDieppe · shopping center
“We put the printer in the middle of the store. People are drawn to it, watch it running and ask us questions. It has a real wow effect.”Lynx Optique You DoClaira · shopping mall
“In my stores, I've made 3D-printed after-sales standard practice. I've thrown out the drawers of spare temples altogether!”Independent opticianDowntown
“The OOmade service lets me stand out in the area; my customers can't believe their eyes.”Independent opticianBusiness park
“I recommend it! Customers are very satisfied. People are starting to talk about it.”Le Collectif des LunetiersGrand-Fort-Philippe
“With the OOmade service, it's super fast. I feel like I've jumped a century!”Independent opticianShopping mall
“A great tool for customers with strong prescriptions who can't do without their glasses!”VisiopolisVilleneuve-lès-Maguelone
“I've worked with lots of 3D printers, but I've never seen one go this fast. It's the Speedy Gonzales of 3D printing!”Independent opticianDowntown
“I put it in the window and the effect is impressive!”Independent opticianBusiness park



Three equipped stores, photographed at work.
Krys, Atol, Optic 2000, Écouter Voir, Lissac, Le Collectif des Lunetiers, Alain Afflelou, Optical Center, LUZ, Optic Libre, Groupe All, CDO. Stores from these chains and buying groups already print in store, alongside unaffiliated independents.
More than 1,000 stores are installed, and the network keeps growing. If you're hesitating, time is working against you: in your area, the question is no longer whether a competitor will get equipped, but which one.



A frame under the chain's brand, made in every equipped store, with no minimum order, no central stock and no unsold items. What it used to cost to develop your own collection, a file now replaces.
An OOlib item can be pushed to every store in a chain the same day. No more campaigns printed by the tens of thousands, distributed and then marked down: each store produces what it uses.
Local manufacturing, no shipping, recyclable materials, a frame repairable identically thanks to its serial number. Facts a purchasing department can drop straight into its own reporting.
Lens manufacturers for the lenses, a health platform for equipped stores' visibility.

A lens manufacturer has a direct interest in a wearer never being left without a solution: a broken frame means a customer who can't see, who waits, and who sometimes goes elsewhere.
That's why their distributors rely on OOmade to guarantee the usability of the lenses they sell. The equipped optician can promise the customer that their prescription will stay usable the day the frame breaks, and can put it on the quote: it's a differentiator at the time of sale, and a ready-made answer to the after-sales question.
A major player in preventive healthcare in France, Doctolib is the go-to for millions of patients looking for a healthcare professional. That's exactly where the wearer whose glasses have just broken is looking.
Doctolib helps promote Vision Minute in France, the directory of opticians who can do emergency repairs. Extra visibility for your store, right where people already look for healthcare.
A service platform for eyewear, built around a 3D printer installed in your store. It lets you make custom final frames under your own brand (OOframe), fix a wearer's glasses in a few minutes from their lenses (OOsave), and produce your accessories, point-of-sale displays and tools (OOlib).
Silmo d'Or 2024 winner, patented technology.
You trace the lenses with your usual tracer or with the smartphone scan, which produces a standard OMA file. You configure the frame in the web interface. You start printing while the customer watches, and while you get on with your work. You assemble and fit with the supplied hinge kit.
No. It's as simple as a microwave: you trace, configure in a few clicks, and print. You never operate the printer, you use a dedicated professional interface. Onboarding support is included in the offer.
A few minutes for an OOsave repair, from tracing to assembly. Several tens of minutes for a complete OOframe final frame, temples included.
Either way, the machine works on its own: you can serve another customer in the meantime.
It depends on the service, and that's intentional.
OOframe, the final frame, is made of PETG compliant with ISO 12870, the standard for spectacle frames. It's made to be worn every day, and can be reprinted identically thanks to its serial number.
OOsave, the backup frame, is made of bio-based PLA and lasts several weeks. Its lifespan is deliberately limited: it lets the wearer see again while a new pair is made, without replacing the sale of final eyewear.
It's up to you. Many opticians give it away or include it in their after-sales service to make an impression. Some charge a token amount, and that goes down very well. Others offer a discount voucher on final eyewear in exchange for returning the printed frame: the customer is happy, and you make a sale.
No problem. You can offer them a discount on their new frame in exchange for returning the printed front, which then goes to recycling. It's the gesture that turns the end of a repair into the start of a sale.
No. The printer sits on a small cabinet or counter, runs quietly and doesn't disrupt your usual flow. It needs no edging, no water circuit and no drainage. Placed in view, it even sparks curiosity: several equipped opticians call it their best window display.
Yes, through two channels. Repairs bring in wearers who weren't your customers: equipped stores report two to three new customers a month, more during holidays. And your store is listed on Vision Minute, the directory where wearers in an emergency look for an immediate solution.
You go from reseller to manufacturer. Where repairs used to happen out of sight in the workshop, they now happen in front of the customer, and become a moment they talk about. Every wearer you help out leaves with a story to tell in your catchment area.
Making on site eliminates shipping, overstock and unsold items: a frame only exists once it's sold. The PLA used for repairs is bio-based, made from corn starch, and both materials are recyclable.
Yes. Prescription lenses aren't recycled by OOmade, but the printed fronts are. An optional return service lets you send them back for reuse or material recycling. Return shipping is paid by the sender; the service is available in mainland France.
It's an all-inclusive solution: delivery, setup, training. Consumables are ordered directly from the shop in the app. And for ZEISS partner opticians, it can be financed with loyalty points: the investment doesn't come out of your cash flow. ZEISS is a partner on the OOsave repair service, which matters directly to a lens maker: a wearer whose frame breaks should neither lose their sight nor switch opticians.
The commitment is a 12-month subscription. The solution is delivered ready to use, on WiFi, with no setup on your side. The subscription amount depends on the region of the world where your store is located: an advisor will give it to you.
A few minutes, and you'll know. In your store, or at a trade show where we exhibit.